Datamax-oneil Class Series Programmer’s Manual Manuale Utente Scaricare il pdf (Pagina 41)

System-Level Command Functions

Class Series Programmer’s Manual 27

STX T Print Quality Label

This command instructs the printer to produce a Print Quality label, a format comprised of different

patterns and bar codes useful in printer setup. (On display-equipped models, this is also one of the

Quick Test formats.) To capture all printed information, use the labels as wide as the maximum print

width (see Appendix K) and at least four inches (102 mm) long.

Syntax:

<STX>T

Printer response (dot

patterns may vary):

STX t Test DRAM Memory Module

This command tests the DRAM module. The printer returns a one-line message stating the module

condition (no message is returned if a module is unavailable).

Syntax:

<STX>t

results

- Test results given as ‘Good’ or ‘Bad’.

Non-Display Models: The printer must be in Test Mode for the command to function. To enable the

Test Mode see the <STX>KD command.

Printer response format:

axxxK results<CR>

Where:

-2 = Slot B

xxx

- Module size in Kbytes

Display-Equipped Models: The printer must have Feedback Characters enabled for this command to

function. Feedback Characters can be enabled via the menu (see the Operator’s Manual for additional

information).

Printer response format:

Module A: xxxxK

DRAM Testedresults<CR>

Module B: xxxxK

DRAM Testedresults<CR>

Module D: xxxxK

DRAM Tested results<CR>

Where:

xxxx

- Module size in Kbytes.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 299 300

Nessun commento

Datamax-oneil Class Series Programmer’s Manual Manuale Utente Pagina 41