Datamax-oneil E-Class Mark III Operator’s Manual Manuale Utente Pagina 28
- Pagina / 90
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
22 Chapter 3 – Printer Operation
NETira CT Usage
1) Once installed launch the NETira CT configuration utility:
2) Be sure the printer is ‘ON’. Connect the host to the printer (see Section 2.2.2 Interface Connections).
For Serial Connections:
a) Query the printer by using the ‘Auto Detect’ button.
This will connect to the printer and retrieve the
setting currently stored in the printer.
For USB and Parallel Connections:
Close the ‘Open a configuration file…’ dialogue box.
a) In the toolbar, from the drop down menu box,
select the appropriate port Then click on the Query
Printer Icon
.
For Ethernet Connections:
Close the ‘Open a configuration file…’ dialogue box.
a) In the toolbar, Click on the ‘ TCP/IP Configuration’
Icon
.
b) In the ‘TCP/IP Configuration’ dialogue box enter the
IP address of the printer, Port: 9100 and click ‘OK’.
(The IP address is displayed on the printer’s
Network Report and Configuration Labels).
c) In the toolbar, from the drop down menu box, select
“TCP_IP”. Then click on the Query Printer Icon
.
- Operator’s Manual 1
- Copyright Information 3
- Limitation of Liability 3
- All rights reserved 4
- Additional Requirements 7
- Kensington Security Slot 8
- Power Supply 9
- AC Power Cord 9
- Power Jack 9
- Electrical Outlet 9
- Ethernet Port 10
- USB Port 10
- Serial Port 10
- USB Host Port 10
- Parallel Port 10
- Cover Release Latch 12
- (Pro+ models only) 12
- Media Hangers 13
- External Media Guide 13
- Hanger Lock 13
- Media Chute Guides 13
- External Media Slot 14
- Media Guides 14
- External Media Supply 14
- Media Backing 15
- Peeler Door 15
- Platen Roller 15
- Peel Bar 15
- Peel Roller 15
- Media Hanger 17
- Core Hanger 17
- Not in use Position 17
- C.S.I Coated Side In Ribbon 18
- to advance 20
- Core Adapter 21
- Ribbon Roll 21
- Ribbon Core 21
- Green/Orange Status LED 23
- Red Error LED 23
- Graphic Display 23
- Directional Arrow Buttons 23
- Multi-function Button 23
- Time/Date 24
- Printer Mode 24
- Programmable Marquee 24
- 3.3.3 Menu Mode 25
- NETira CT Usage 28
- Important Notes: 31
- 3.7.1 Quick Calibration 32
- 3.7.2 Manual Calibration 33
- button, set the 35
- button, increment the 35
- 18 174 42 9 38
- Chapter 4 – Menu System 35 41
- 36 Chapter 4 – Menu System 42
- Column Offset 45
- Cotton Swab with Solvent 58
- Printhead 58
- Cleaning Card Procedure 59
- Cleaning Film Procedure 59
- Ribbon Handler 60
- Gap or Notch Indicator 61
- Reflective (Mark) Indicator 61
- Bottom AMS Sensor 61
- Top AMS Sensor 61
- Printhead Assembly Tabs 62
- Printhead Carrier 62
- Printhead Shield Tabs 62
- Printhead Shield 63
- Printhead Screw 63
- Printhead Cable 63
- Platen Roller Tabs 64
- Platen Roller Assembly 64
- Mechanical 71
- Printing 71
- Media / Ribbon 72
- Communications 72
- Embedded Bar Codes 72
- button 75
- • Microsoft 85
Prodotti e manuali riguardandi Stampanti per fotografie Datamax-oneil E-Class Mark III Operator’s Manual
Stampanti per fotografie Datamax-oneil E-Class Mark III MPU-4000 & PSC-4000 Installat Manuale Utente
(2 pagine)
(2 pagine)
Stampanti per fotografie Datamax-oneil Class Series II Programmer’s Manual Manuale Utente
(334 pagine)
(334 pagine)
Stampanti per fotografie Datamax-oneil E-Class Mark III 3xxxxxxx Operator’s Manual Manuale Utente
(58 pagine)
(58 pagine)
Stampanti per fotografie Datamax-oneil E-Class Mark III Printhead Bracket and Screw Upgra Manuale Utente
(11 pagine)
(11 pagine)
Greenway Home Products GWD6960BLS Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Nein Greenway Home Products GWD6960BLS.
Wir stellen 1 PDF-Handbücher Greenway Home Products GWD6960BLS zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Commenti su questo manuale