Datamax-oneil DPL Programmer’s Manual Manuale Utente Scaricare il pdf (Pagina 37)

System-Level Command Functions

STX w Test Flash Memory Module

This command tests the Flash module. The time for each test will vary from 20 to 120

seconds, depending upon the size of the module. All stored data will be destroyed. If

no module is present, there will be no printer response.

Syntax:

STX>wa

Where:

Module designator; see Appendix K.

Response format:

Module A: xxxxK results

Where:

Module tested.

xxxx

Module size in Kbytes.

results -

Test results given as “Good” or “Bad”.

STX X Set Default Module

This command, typically used prior to the loading of PCL-4 bitmapped fonts (see Font

Loading Commands), is designed to allow the user to select between modules when

downloading information. The default module is one of the following:

1. The first alpha designator of the existing modules if item 2 has not occurred.

2. The module selected by this command.

Syntax:

STX>Xa

Where:

Module designator; See Appendix K.

Sample:

<STX>XB

The sample above sets “B” as the default module.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 295 296

Nessun commento

Datamax-oneil DPL Programmer’s Manual Manuale Utente Pagina 37